For SL45/45i FW 54 :
1. Check if you have SL45 FW verion 54 - *#06# + left softkey ;
2. Check if you have windows 98 - My computer properties ;
3. Open Device manager and set com port speed for both ports to 115200 ;
4. Get Unisiemens - groups.yahoo.com/SL45/files area ;
5. Extract Unisiemens - then reboot your pc and make shure that no programs are
using com ports !!! ;
6. Run DongleEmmu program drom subfolder DongleEmmu ;
7. Open file - emul.kpp, then Enable emmulator ;
8. Run Unisiemens - Chose model SL4x - set com port 1 ;
9. Turn off your phone - press Read EEP - after 2 seconds put phone
in to docking station ;
10. After activity ends press Save File;
11. Take off battery put it back on and turn on the phone ;
12. Turn off phone and press Read Flash - after 2 seconds put phone
in to docking station ;
13. Downloading flash will take 10 - 15 minutes ( depends on comuter you are
using ) ;
14. After activity ends press Save File - name it Original.bin ;
15. Download HexWorkshop - http://64.55.140.168/downloads/hw32v31.exe -
install it ;
16. Run HexWorkshop - Open file Original.bin ;
17. Press CTRL+G ( go to offset ) - small window will pop up enter there
00217F58 ;
18. Make shure that OVR mode is active ( look at bottom right of HexWorkshop
window ) ;
19. Press 2 keys - 0 ( zero ) and D ;
20. File - Save as Pach.bin ;
21. Unisiemens - Open File - Pach.bin ;
22. Run step 11 ;
23. Turn off phone ;
24. Unisiemens - press Write Flash - after 2 seconds put phone in to docking
station ;
25. Uploading flash will take 10 - 15 minutes ( depends on comuter you are
using ) ;
26. After activity ends - step 11.
27. Turn on phone - enter PIN or confirm swich on - then MENU + # or MENU + * ;
28. Have FUN !!!
Tested and works 100%
ADDON : have not tested by believe it works !
For S/ME 45 FW 26 :
There are 2 flashes in S/ME 45 - you need to download,edit and upload both
flash'es ( e.g Pach1.bin and Pach2.bin ) !
Do the same as for SL45 - only diffrences are Phone Model and offet : 002AD7B8. You need to change from 2D to 0D ( zero D ). And after step 20. do following : Step 21.1 : get S/ME 45 CRC corrector from files area and correct checksum for modifyed Pach1/2.bin files.
For S/C/M 35 :
Do the same as for SL45 - only diffrence are offsets and Phone Model.
And after step 20. do following : Step 21.1 get S/C/M 35 CRC corrector from files area and correct checksum for modifyed Pach.bin file.
For all FW versions :
07FF40 FF -> 00
07FF41 FF -> 00
For S35 FW versions you also need to pach :
FW 12
148454 2D -> 0D
1538A5 8F -> 8E
FW 16
1494DE 2D -> 0D
1537CB 8F -> 8E
FW 18
149BCC 2D -> 0D
1553D7 8F -> 8E
FW 20, FW21
1477CC 2D -> 0D
155DB3 8F -> 8E
FW 24
14A880 2D -> 0D
155E55 8F -> 8E
For C/M 35 FW versions you also need to pach :
FW 12
12CC02 2D -> 0D
137E99 8F -> 8E
FW 16
12DCB4 2D -> 0D
1393D7 8F -> 8E
FW 18
12E4CE 2D -> 0D
139B4F 8F -> 8E
FW 20
12EE16 2D -> 0D
139F95 8F -> 8E
FW 21
12EE16 2D -> 0D
139FBF 8F -> 8E
FW 24
12EF9C 2D -> 0D
13A461 8F -> 8E
Original solution by DarkBear.
Written by VLD for all Siemens users around the world.
EOF